Xalatan is an anti-glaucoma drug. It can also be used for other purposes that have not been mentioned here.

Latanoprost 60 Pills 10mg $129 - $2.15 Per pill
Latanoprost 60 Pills 5mg $109 - $1.82 Per pill
Latanoprost 90 Pills 10mg $179 - $1.99 Per pill
Latanoprost 90 Pills 5mg $159 - $1.77 Per pill

Generic latanoprost and timolol (Dasatinib) were analyzed in patients with melanoma who were not responsive to conventional therapy and who failed prior therapy, regardless of previous dose-ranging regimens. regimens latanoprost generico ratiopharm were initially administered in a 4:1 mixture of lansoprazole/raltegravir and were titrated up to 75 mg/m2/d of lansoprazole or a 25 mg dose of latanoprost price in usa timolol. 13 patients who received more than 40 weekly doses of dosimetry data (baseline and week 10), 5 withdrew because of severe side effects (i.e., nausea and vomiting); 4 patients withdrew because of adverse reactions that occurred following an increased dosage or dose-ranging protocol. Nine patients were lost to follow-up. No patient developed a toxic effect during the course of study. Only 2 patients on tamoxifen or gemcitabine, all with metastatic melanoma, developed severe toxicity involving the heart (1 in tamoxifen group and 2 the gemcitabine group). At one year, 8 patients had an overall survival of less than 20 months, including 5 patients on tamoxifen and the remaining 4 on gemcitabine. Adverse-Side effects included nausea, vomiting, hyperprolactinemia, and pancreatitis. The median time to progression was 7.4 months (median, 4.0 months) in the tamoxifen group and 5.9 months (median, 2.4 months) in the gemcitabine group. Among patients who completed the study, overall survival rate was 50.9 percent, with a median time to progression of 5.5 months (25 the 13 patients), and median overall Latanoprost 100 Capsules 100mg $167 - $1.67 Per pill survival for deaths, disease progression, and death at 90 days was 60 months (range, 18-93 months) in the tamoxifen group and 53 months (range, 17-90 months) in the gemcitabine group. Among patients who did not complete the study or were lost to follow-up, the median survival was 17 months (range, 16-19 months); survival rates ranged from 20 to 73 months (median, months). There were no drug-related deaths in this study at any time, but 6 men died who had started on tamoxifen prior to enrollment. In patients with metastatic melanoma who had received prior treatment with dorzolamide and did not respond to this prior treatment, one had metastatic prostate cancer with a grade III.

  1. cost of generic latanoprost
  2. latanoprost is generic for
  3. price of latanoprost eye drops
  4. nombre generico de latanoprost

When did generic latanoprost become available

Cost of generic latanoprost /tramadol is estimated at latanoprost collirio generico $300 compared to $2 $1400 generic latanoprost ophthalmic solution for phenazopyrrolate patients weighing 60kg & above. References: http://www.drugsafety.gov.au/drugs/generic/tablets/tramadol.html http://www.drugsafety.gov.au/drugs/generic/tablets/lopressor.html http://www.nhpr.org/sections/health/medical-examiner/drugs-that-kill-1.shtml http://www.cnn.com/2004/SYRCH/05/07/lopressor.apf?_r=3&hp http://www.nhpr.org/sections/health/medical-examiner/drugs-that-kill-2.shtml http://healthimpactnews.com/2004/08/14/a-new-drug-that-killing-tramadol/ http://www.huffingtonpost.com/2004/08/13/tramadol-overdose-deadly_n_107932.html http://www.washingtonpost.com/wp-dyn/content/article/2005/04/15/AR2005040503074.html https://www.medicindepth.com/tramadol-info/

Generic latanoprost vs xalatan Latanoprost is generic for

SprembergLatanoprost Mühldorf am Inn
Latanoprost OrtenbergSchloß Holte-Stukenbrock

  1. latanoprost cost australia
  2. drugstore bb cream usa
  3. latanoprost cost australia
  4. best drugstore bb cream us

Latanoprost generic for lumigan and dolichoprost, clomiphene (soma) as additional therapies." Clomiphene, an estrogen receptor antagonist, may play an important role in the reduction of side effects. However, it can be dangerous if misapplied, so it is important to discuss options with your doctor. Also, make sure to inform men about the risk when using vasculosuppressants to reduce prostate symptoms – there may be no benefit for the patient and there may be very serious complications, especially if the patient does not have a family history of prostate cancer. Also read: 5 Reasons to Take Vasodilators Before The Prostate Treatment options are also more varied for PCOS. "Most patients diagnosed with PCOS will follow the approach of hormonal therapy, which involves either a combination of HRT-type progestins or estrogen and progestin combinations without an estrogen component, such as clomiphene citrate, or oral contraceptives like NuvaRing, while others may opt for hormone-reduction drugs, which can include either a progestogen or an Estrogen receptor antagonist, like letrozole, ovarine, dutasteride, and medroxyprogesterone acetate." The last year or so has seen some really amazing content in the world of professional wrestling thanks to the rise of YouTube and other forms video-sharing. In fact, for those of you that have been watching Raw or SmackDown, I'd seriously recommend you check out the first few minutes of some the best highlights on WWE.com. In this article we will be previewing ten of the best videos coming out of this year with commentary by some of the pros that have shared their thoughts on favorite matches. If you're a SmackDown fan, you might want to skip down the WWE Network section to see what we have say for those fans of Raw. Feel free to comment below any I have missed or additional suggestions. Daniel Bryan v. Sheamus If you are a fan of WWE's Daniel Bryan, please know that after last Sunday's match, he is no longer the WWE Champion. Instead (like every other championship match during his time in WWE), when it comes to a title shot he will take on Sheamus. Bryan lost the match when he was champion the World Heavyweight sidelined by injuries after losing to Chris Jericho. When we asked Bryan about it, he said: "Yes, yes, I was champion. That's what title means. I was the man. beat a lot of people that would have been good opponents and I was ready to get back at people that were not. forget I was champion until they don't want to face me but when I was champ, a lot of the guys from main roster came down to the midcard and were champion like Randy Orton and Seth Rollins." — DANIEL BRYAN Daniel Bryan Vs. The Wyatt Family Before Daniel Bryan faced Brock Lesnar at Last Man Standing, Bryan was considered the best man on roster when it comes to being the one get beat up. He lost the match when Big Show defeated him by elbowing in the face with an elevated ladder. Bryan continued on with his plan to fight the Wyatt Family one by but Daniel Bryan's WWE career couldn't get off the ground. Bryan continued to suffer injuries throughout his run at WWE, which led to him taking time off from wrestling. While we have had glimpses of that Bryan yesterday and Daniel of today on WWE television, I'd really suggest you give a listen to "WWE Unfiltered", the podcast in which three stars of WWE talk to the Universe. You can also read this article here on Deadspin for more information Daniel Bryan's time away from WWE late.
When Did Generic Latanoprost Become Available
5-5 stars based on 297 reviews


International Journal of Energy and Environment (IJEE)

Official Journal of the International Energy and Environment Foundation (IEEF)

The International Journal of Energy and Environment (IJEE) is a multi-disciplinary, peer-reviewed open access journal, covering all areas of energy and environment related fields that apply to the science and engineering communities. The journal enjoys the full support of the IEEF, who provide funds to cover all costs of publication, including the Article Processing Charges for all authors. Therefore the journal is both free to read and free to publish in for everyone. IJEE aims to promote rapid communication and dialogue among researchers, scientists, and engineers working in the areas of energy and environment. The journal provides a focus for activities concerning the development, assessment and management of energy and environment related programs. The emphasis is placed on original research, both analytical and experimental, which is of permanent interest to engineers and scientists, covering all aspects of energy and environment. It is hoped that this journal will prove to be an important factor in raising the standards of discussion, analyses, and evaluations relating to energy and environment programs. All manuscripts with significant research results in the areas of energy and environment and their application are welcome. The International Journal of Energy and Environment is published 6 times per year by the International Energy and Environment Foundation. There are no page charges and all articles are indexed by the major indexing media therefore providing the maximum exposure to the articles.

Find out more about the journal on the journal homepage;

ISSN 2076-2895 (Print)
ISSN 2076-2909 (Online)

Book Series.

CFD Applications in Energy and Environment Sectors: Volume 1.
Maher A.R. Sadiq Al-Baghdadi and Hashim R. Abdol Hamid, Editors

Chapter 1: Simulation and Modelling of Oxygen Coal Combustion with Flue Gas Recirculation.

Chaouki Ghenai

Chapter 2: The Choice of the Best Air Distribution Concept in Air-Conditioned Auditorium by Means of CFD Numerical Prediction.

Barbara Lipska, Piotr Koper

Chapter 3: CFD Applications in Natural Ventilation of Buildings and Air Quality Dispersion.

N. Nikolopoulos, A. Nikolopoulos, I. Papadakis, K.-S. P. Nikas

Chapter 4: CFD Modeling of Air Pollutant Transport and Dispersion.

Labovsk Juraj, Jelemensk Ľudovt

Chapter 5: CFD Modeling of Multiphase Flow in Environmental Engineering.

Masroor Mohajerani, Mehrab Mehrvar, Farhad Ein-Mozaffari

Chapter 6: CFD Study on the Roles of Trees on Airflow and Pollutant Dispersion within Urban Street Canyons.

Salim Mohamed Salim, Andrew Chan, Riccardo Buccolieri, Silvana Di Sabatino

Chapter 7: Energy Efficiency and Air Quality in Hospitals Design.

Essam E. Khalil

Chapter 8: Application of CFD in Pulverized Fuel Combustion.

M. Tayyeb Javed, Tahira Sultana

Chapter 9: A Heat Transfer Model For Fluids Based on Cellular Automaton Application to an Air Conditioning of A Building.

Andrs Saiz Martnez

Chapter 10: CFD Application in Power Plants.

Essam E. Khalil

Chapter 11: Analysis and Computation of the Heat Charge/Discharge Behavior in Packed Bed Thermal Storage Systems.

Pei-Wen Li, Jon Van Lew, Wafaa Karaki, Cho Lik Chan, Jake Stephens

ISBN 13: 978-1-46623-065-1
Pages: 364 - Published: 2011

Book Series.

Engineering Applications of Computational Fluid Dynamics: Volume 1.
Maher A.R. Sadiq Al-Baghdadi, Editor

Chapter 1: Filtered Density Function as a Modern CFD Tool.

N. Ansari, F.A. Jaberi, M.R.H. Sheikhi, P. Givi

Chapter 2: CFD Applications in Steam Boilers.

N. Nikolopoulos, A. Nikolopoulos, E. Karambinis, M. Agraniotis, P. Grammelis, E. Kakaras

Chapter 3: CFD Simulation on Human-Environment System.

Shengwei Zhu

Chapter 4: CFD Applications in Membrane Technology by Finite Element Analysis.

Jos M. Gozlvez-Zafrilla, Asuncin Santaf-Moros

Chapter 5: CFD Modelling of Stirred Tanks.

Z. Driss, M. Ammar, W. Chtourou, M.S. Abid

Chapter 6: CFD Modeling and Simulations: Horizontal Deep Drilling Process and Filter Cake Formation.

Mohd A. Kabir, Isaac K. Gamwo

Chapter 7: CFD Simulation of Phase Particle Entrapment.

Peymani F. Y., Ganbari S. A., Liu Y., Hayatdavoudi A.

Chapter 8: Simulation of Low-Btu Syngas Combustion in Trapped Vortex Combustor.

Khaled Zbeeb, Chaouki Ghenai

Chapter 9: Experimental, Analytical and Numerical Investigation of a Swirling Submerged Jet Flow.

H. Alighanbari, M. R. Amiralaei, S. Savtchenko

Chapter10: CFD Simulations of Two-Phase Flow.

Yu Zhang

Chapter11: CFD Simulation of Syntrophic Anaerobic Digestion of Volatile Fatty Acids in a Continuous Stirred Reactor.

T. Amani, S.M. Mousavi, M. Nosrati

ISBN 13: 978-1-46623-106-1
Pages: 448 - Published: 2011


CFD Modeling in Development of Renewable Energy Applications.
Maher A.R. Sadiq Al-Baghdadi, Editor

Chapter 1: A Multi-fluid Model to Simulate Heat and Mass Transfer in a PEM Fuel Cell.

Torsten Berning, Madeleine Odgaard, Sren K. Kr

Chapter 2: CFD Modeling of a Planar Solid Oxide Fuel Cell (SOFC) for Clean Power Generation.

Meng Ni

Chapter 3: Hydrodynamics and Hydropower in the New Paradigm for a Sustainable Engineering.

Helena M. Ramos, Petra A. Lpez-Jimnez

Chapter 4: Opportunities for CFD in Ejector Solar Cooling.

M. Dennis

Chapter 5: Three Dimensional Modelling of Flow Field Around a Horizontal Axis Wind Turbine (HAWT).

Chaouki Ghenai, Armen Sargsyan, Isam Janajreh

Chapter 6: Scaling Rules for Hydrodynamics and Heat Transfer in Jetting Fluidized-Bed Biomass Gasifiers.

K. Zhang, J. Chang, P. Pei, H. Chen, Y. Yang

Chapter 7: Investigation of Low Reynolds Number Unsteady Flow around Airfoils in Pitching, Plunging and Flapping Motions.

M.R. Amiralaei, H. Alighanbari, S.M. Hashemi

Chapter 8: Justification of Computational Fluid Dynamics Simulation for Flat Plate Solar Energy Collector.

Mohamed Selmi, Mohammed J. Al-Khawaja, Abdulhamid Marafia

Chapter 9: Comparative Performance of a 3-Bladed Airfoil Chord H-Darrieus & a 3-Bladed Straight Chord H-Darrieus Turbines using CFD.

R. Gupta, Agnimitra Biswas

Chapter10: Computational Fluid Dynamics for PEM Fuel Cell Modelling.

A. Iranzo, F. Rosa

Chapter11: Analysis of the Performance of PEM Fuel Cells: Tutorial of Major Functional and Constructive Characteristics using CFD Analysis.

P.J. Costa Branco, J.A. Dente

Chapter12: Application of Techniques of Computational Fluid Dynamics in the Design of Bipolar Plates for PEM Fuel Cells.

A.P. Manso, F.F. Marzo, J. Barranco, M. Garmendia Mujika

ISBN 13: 978-1-46623-131-3
Pages: 414 - Published: 2011

Book Series.

Engineering Applications of Computational Fluid Dynamics: Volume 2.
Maher A.R. Sadiq Al-Baghdadi, Editor

Chapter 1: CFD Modeling of Methane Reforming in Compact Reformers.

Meng Ni

Chapter 2: FEM Based Solution of Thermo Fluid Dynamic Phenomena in Solid Oxide Fuel Cells (SOFCS).

F. Arpino, A. Carotenuto, N. Massarotti, A. Mauro

Chapter 3: Computational Fluid Dynamics in the Development of a 3D Simulator for Testing Pollution Monitoring Robotic Fishes.

John Oyekan, Bowen Lu, Huosheng Hu

Chapter 4: CFD Applications in Electronic Packaging.

C.Y. Khor, Chun-Sean Lau, M.Z. Abdullah

Chapter 5: CFD Simulation of Savonius Wind Turbine Operation.

Joo Vicente Akwa, Adriane Prisco Petry

Chapter 6: Intermittency Modelling of Transitional Boundary Layer Flows on Steam and Gas Turbine Blades.

Erik Dick, Slawomir Kubacki, Koen Lodefier, Witold Elsner

Chapter 7: Numerical Analysis of the Flow through Fitting in Air Conditioning Systems.

N.C. Uzrraga-Rodriguez, A. Gallegos-Muoz, J.M. Belman-Flores, J.C. Rubio-Arana

Chapter 8: Design and Optimization of Food Processing Equipments using Computational Fluid Dynamics Modeling.

N. Chhanwal and C. Anandharamakrishnan

Chapter 9: Fuel and Intake Systems Optimization of a Converted LPG Engine:

Steady and Unsteady in-Cylinder Flow CFD Investigations and Experiments Validation.

M. A. Jemni, G. Kantchev, Z. Driss, M. S. Abid

Chapter10: Computational Fluid Dynamics Application for Thermal Management in Underground Mines.

Agus P. Sasmito, Jundika C. Kurnia, Guan Mengzhao, Erik Birgersson, Arun S. Mujumdar

Chapter11: Computational Fluid Dynamics and its Applications.

R.Parthiban, C.Muthuraj, A.Rajakumar

ISBN 13: 978-1-47832-935-0
Pages: 382 - Published: 2012


PEM Fuel Cells - Fundamentals, Modeling and Applications.
Maher A.R. Sadiq Al-Baghdadi, Author

Part I: Fundamentals

Chapter 1: Introduction.

Chapter 2: PEM fuel cell thermodynamics, electrochemistry, and performance.

Chapter 3: PEM fuel cell components.

Chapter 4: PEM fuel cell failure modes.

Part II: Modeling and Simulation

Chapter 5: PEM fuel cell models based on semi-empirical simulation.

Chapter 6: PEM fuel cell models based on computational fluid dynamics.

Part III: Applications

Chapter 7: PEM fuel cell system design and applications.

ISBN 13: 978-1-48197-823-1
Pages: 280 - Published: 2013


Alternative Fuels Research Progress.
Maher A.R. Sadiq Al-Baghdadi, Editor

Chapter 1: Pollutant Emissions and Combustion Characteristics of Biofuels and Biofuel/Diesel Blends in Laminar and Turbulent Gas Jet Flames.

R. N. Parthasarathy, S. R. Gollahalli

Chapter 2: Sustainable Routes for The Production of Oxygenated High-Energy Density Biofuels from Lignocellulosic Biomass.

Juan A. Melero, Jose Iglesias, Gabriel Morales, Marta Paniagua

Chapter 3: Optical Investigations of Alternative-Fuel Combustion in an HSDI Diesel Engine.

T. Huelser, M. Jakob, G. Gruenefeld, P. Adomeit, S. Pischinger

Chapter 4: An Insight into Biodiesel Physico-Chemical Properties and Exhaust Emissions Based on Statistical Elaboration of Experimental Data.

Evangelos G. Giakoumis

Chapter 5: Biodiesel: A Promising Alternative Energy Resource.

A.E. Atabani

Chapter 6: Alternative Fuels for Internal Combustion Engines: An Overview of the Current Research.

Ahmed A. Taha, Tarek M. Abdel-Salam, Madhu Vellakal

Chapter 7: Investigating the Hydrogen-Natural Gas Blends as a Fuel in Internal Combustion Engine.


Chapter 8: Conversion of Bus Diesel Engine into LPG Gaseous Engine; Method and Experiments Validation.

M. A. Jemni , G. Kantchev , Z. Driss , R. Saaidia , M. S. Abid

Chapter 9: Predicting the Combustion Performance of Different Vegetable Oils-Derived Biodiesel Fuels.

Qing Shu, ChangLin Yu

Chapter10: Production of Gasoline, Naphtha, Kerosene, Diesel, and Fuel Oil Range Fuels from Polypropylene and

Polystyrene Waste Plastics Mixture by Two-Stage Catalytic Degradation using ZnO.

Moinuddin Sarker, Mohammad Mamunor Rashid

ISBN 13: 978-1-48405-771-1
Pages: 442 - Published: 2013


Computational Fluid Dynamics Applications in Green Design.
Maher A.R. Sadiq Al-Baghdadi, Editor

Chapter 1: Computational Fluid Dynamics Applications in Green Building Design.

Zhiqiang (John) Zhai

Chapter 2: CFD Investigation of the Ventilation and Thermal Performance of a Wind Tower Design Integrated with Heat Transfer Devices.

John Kaiser Calautit, Ben Richard Hughes, Hassam Nasarullah Chaudhry, Saud Abdul Ghani

Chapter 3: Computational Fluid Dynamics in Concentrating Solar Technologies.

M.I. Roldan, L. Valenzuela, J. Fernandez-Reche

Chapter 4: Numerical Simulation in One Room with an Energy Conservation Air Conditioner.

Di Liu, Fu-Yun Zhao

Chapter 5: Modified Rayleigh Method for Calculating the Natural Frequency of Stepped Cantilever Beam.

Luay S. Alansari

Chapter 6: CFD Computation of a Small Incurved Savonius Wind Rotor.

Zied Driss, Olfa Mlayeh, Makram Maaloul, Mohamed Salah Abid

Chapter 7: Study on Buffeting Performance of a Long-Span Cable-Supported Bridge Based on Numerical Simulation and Field Measurement.

Hao Wang, Tong Guo, Tianyou Tao, Aiqun Li

Chapter 8: CFD-Based Analysis and Optimization of Gas Cyclones Performance.

Khairy Elsayed, Chris Lacor

Chapter 9: CFD Modelling of Floor Heating System in Dome Shape Rooms According to the Thermal Comfort Condition.

T. Khademinejad, S. Rahimzadeh, P. Talebizadeh, H. Rahimzadeh, H. Sarkardeh

Chapter10: Computational Fluid Dynamics Modelling in Environmental Friendly Energy Systems.

Adla Machčkov, Radim Kocich, Peter Horbaj

Chapter11: CFD Modeling and Analysis of Inlet and Exhaust Gaseous Flow System. Case of an Alternative Fueling IVECO Engine.

M. A. Jemni, G. Kantchev, M. S. Abid

Chapter12: Application of CFD and HAM Models in Green Building Design: A Review.

Piaia J.C.Z., Cheriaf M., Rocha J.C.

Chapter13: Computational Fluid Dynamics Study for Hydrolysis of Urea.

J. N. Sahu, B.C. Meikap, Anand V. Patwardhan

ISBN 13: 978-1-49487-575-6
Pages: 402 - Published: 2014


Stress Redistribution in Composite Materials.
Luay S. Alansari, Author

Part I:Introduction
1.1. General
1.2. Classifications of Composite Materials
1.3. Elastic Properties of Fiber Composite Materials
1.4. Failure in Fiber Composite Materials
1.5. The Load Sharing Theory
1.6. Micromechanical Model of the Fractures of Composite Materials

Part II: Theoretical Analysis
2.1. Introduction
2.2. The Micromechanical Shear Lag Model
2.3. Modifying of Influence Superposition Technique
2.4. Finite Element Analysis
2.5. Cases Studying

Part III: Results
3.1. Introduction
3.2. Single Fiber Break Case
3.3. Single Matrix Break Case
3.4. Multi-Breaks Cases
3.5. Misalignment Case
3.6. Shear Stress Results



ISBN 13: 978-1-49730-742-1
Pages: 132 - Published: 2014


PEM Fuel Cells - from Single Cell to Stack

Fundamentals, Modeling, Analysis, and Applications
Maher A.R. Sadiq Al-Baghdadi, Author

Part I: Fundamentals

Chapter 1: Introduction.

Chapter 2: PEM fuel cell thermodynamics, electrochemistry, and performance.

Chapter 3: PEM fuel cell components.

Chapter 4: PEM fuel cell failure modes.

Part II: Modeling and Simulation

Chapter 5: PEM fuel cell models based on semi-empirical simulation.

Chapter 6: PEM fuel cell models based on computational fluid dynamics (CFD).

Part III: Analysis

Chapter 7: PEM fuel cell analysis.

Chapter 8: PEM fuel cell stack design, assembly, and analysis.

Part IV: Applications

Chapter 9: PEM fuel cell system design and applications.

ISBN 13: 978-1-50588-564-4
Pages: 382 - Published: 2015


Dynamic Analysis Investigation of Stiffened and Un-Stiffened Composite Laminated Plate Subjected to Transient Loading
Muhannad Al-Waily, Author

Chapter 1: Introduction.

Chapter 2: Mechanical Properties of Composite Laminated.

Chapter 3: Dynamic Analysis Investigation of Composite Plate with Different Laminated Theories.

Chapter 4: Modal Analysis.

Chapter 5: Numerical Investigation.

Chapter 6: Case Study.

ISBN 13: 978-1-50757-536-9
Pages: 342 - Published: 2015


Analytical and Numerical Buckling and Vibration Investigation of Isotropic and Orthotropic Hyper Composite Materials Structures
Muhannad Al-Waily, Author

Chapter 1: Introduction.

Chapter 2: Analytical and Numerical Investigation.

Chapter 3: Vibration Plate and Beam Case Study.

Chapter 4: Buckling Plate Case Study.

ISBN 13: 978-1-50588-564-4
Pages: 244 - Published: 2015

Book Series.

Engineering Applications of Computational Fluid Dynamics: Volume 3.
Maher A.R. Sadiq Al-Baghdadi, Editor

Chapter 1: CFD Analysis of Wood Biomass Combustion and Flue Gas Waste Heat Usage in Modern Energetic Devices.

Marian Bojko, LumrHruk, Adam Bureček, RadimKocich, AdlaMachčkov, LenkaKunčick

Chapter 2: CFD Modelling in Solar Thermal Engineering.

M.I. Roldn, J. Fernndez-Reche, L. Valenzuela, A. Vidal, E.Zarza

Chapter 3: Numerical Analysis Investigation Study of Deflection and Stresses with Size and Number Holes Effect of Different Composite Laminated Plate Structures Types.

Muhannad Al-Waily

Chapter 4: Theoretical Study of A Cold Air Distribution System with Different Supply Patterns

Hyder Mohammed Abdul Hussein

Chapter 5: Computer Simulation of the Turbulent Flow Inside a Heat Exchanger for Different Inclined Angles of the Diffusers.

SobhiFrikha, ZiedDriss, Mohamed AymenHagui

Chapter 6: Numerical and Experimental Investigation of Multi points Die Forming.

Abdul Kareem JalilKadhim, Ragad Aziz Neama

ISBN 13: 978-1-51178-878-6
Pages: 292 - Published: 2015

Book Series.

Engineering Applications of Computational Fluid Dynamics: Volume 4.
Maher A.R. Sadiq Al-Baghdadi, Editor

Chapter 1: Theoretical and Numerical Investigation of Vibration and Buckling Analysis Beam with Crack Depth, Location and Orientation Effect.

Muhannad Al-Waily

Chapter 2: Numerical Simulation of Air Distribution System with Different Supply Patterns.

Hyder Mohammed Abdul Hussein

Chapter 3: Reynolds-Averaged Navier-Stokes Modelling of Air Pollution at the Local Urban Scale.

Desmond Adai, Martin Jaeger

Chapter 4: Computational Thermo-Fluid Dynamics of Turbulent Free Surface Flow using Level Set Method.

Ashraf Balabel

Chapter 5: CFD Computation of the Aerodynamic Structure of Arched Roof Obstacles with Different Heights.

Slah Driss, Zied Driss, Imen Kallel Kammoun

Chapter 6: CFD Computation of a Water Savonius Rotor.

Ibrahim Mabrouki, Zied Driss, Mohamed Salah Abid

Chapter 7: CFD Investigations of LPG Engine Mixture Device - Case of Hydrogen Enriched Fuelled Engine.

M. A. Jemni, S. HadjKassem, M. S. Abid

ISBN 13: 978-1-51197-480-6
Pages: 252 - Published: 2015


Applications of Computational Fluid Dynamics and Finite Element Methods in Engineering Education

Maher A.R. Sadiq Al-Baghdadi, Author

Chapter 1: Introduction.

Chapter 2: Three-Dimensional Computational Fluid Dynamics Model for Analysis and Design of PEM Fuel Cells.

Chapter 3: CFD Analysis of the Clamping Pressure Distribution in Running PEM Fuel Cell.

Chapter 4: CFD Study of Power Transistor Heat Sinks Using Different Patterns of Micro Pin Fins for Heat Transfer Enhancement.

Chapter 5: Natural Vibration Analysis and Mode Shapes of a PEM Fuel Cell Stack.

Chapter 6: CFD Study of a Power Transistor Heat Sink for Better Cooling.

Chapter 7: CFD Modeling of Dust Transport and Dispersion through an Office.

ISBN 13: 978-1-51212-242-8
Pages: 238 - Published: 2015

Book Series.

Engineering Applications of Computational Fluid Dynamics: Volume 5.
Maher A.R. Sadiq Al-Baghdadi, Editor

Chapter 1: Modeling of Attached and Detached Turbulent Viscous Fluid Flow over Symmetrical Aerofoil.

Sahib Shihab Ahmed

Chapter 2: Enhancement of Heat Transfer Agent for a Flat-Plate Solar Collector by using Nanofluids.

Sura Q. Kadhim, Mohammed Hussein K. Abbas

Chapter 3: Experimental and Numerical Investigation to Evaluate the Performance of Triangular Finned Tube Heat Exchanger.

Vinous M. Hameed, Bashar MuslemEssa

Chapter 4: Experimental and Numerical Investigation of Shell and Helical Coil Tube Heat Exchanger.

Vinous M. Hameed, Ahmed RaadBahlool

Chapter 5: Natural Convection Heat Transfer from Rectangular Fins with Different Configurations Including Interruption.

Zaid Hameed Hasan

ISBN 13: 978-1-54035-259-0
Pages: 346 - Published: 2016


Physical modeling of PIANO KEY weir: Detailed experimental study.

Full data set of more than 2800 experiments

Over 320 illustrations in color

Mohammed Baqer N. Al-Baghdadi, A

Chapter 1: Introduction.

Chapter 2: Discharge capacity of Piano Key weir.

Chapter 3: Physical modeling: Derivation of governing relations.

Chapter 4: Laboratory work.

Chapter 5: Results and discussion: Laboratory observations.

Chapter 6: Analysis of results.

Chapter 7: Formulation of results.

Appendix A: Data Sets.

Appendix B: Photographs of PKW Models during Experiments.

Appendix C: Detailed Drawings of Experimental Models.

ISBN 13: 978-1-53971-134-6
Pages: 342 - Published: 2016


Analytical and Experimental Investigations Vibration Study of Isotropic and Orthotropic Composite Plate Structure with Various Crack Effect.

Muhannad Al-Waily, Author

Chapter 1: Introduction.

Chapter 2: Theoretical and Experimental Investigations Mechanical Properties of Composite Materials.

Chapter 3: Analytical and Experimental Investigations Vibration Study of Composite Plate Structure.

Chapter 4: Vibration Case Study.


ISBN 13: 978-1-54403-151-4
Pages: 306 - Published: 2017


Materials Science and Engineering.

Noor Hussein, Author

Chapter 1: Introduction to Materials Science and Engineering.

Chapter 2: Atomic Structure and Interatomic Bonding.

Chapter 3: The Structure of Crystalline Solids.

Chapter 4: Imperfections in Solids.

Chapter 5: Mechanical Properties of Metals.

Chapter 6: Fracture Mechanics, Fatigue, and Creep Behavior.

Chapter 7: Phase Equilibrium Diagrams.

Chapter 8: The IronCarbon System.

Chapter 9: Metal Alloys.

Appendix: Physical Properties of Some Elements.

ISBN 13: 978-1-54408-380-3
Pages: 212 - Published: 2017


PEM Fuel Cell Engines

Principles, Design, Modelling, and Analysis
Maher A.R. Sadiq Al-Baghdadi, Author

Part I: Principles

Chapter 1: Introduction.

Chapter 2: PEM fuel cell thermodynamics, electrochemistry, and performance.

Chapter 3: PEM fuel cell components.

Chapter 4: PEM fuel cell failure modes.

Part II: Design

Chapter 5: PEM fuel cell engines design.

Part III: Modelling and Simulation

Chapter 6: PEM fuel cell models based on semi-empirical simulation.

Chapter 7: PEM fuel cell models based on computational fluid dynamics.

Chapter 8: PEM fuel cell stack models based on solid mechanics-computational fluid dynamics.

Chapter 9: Steam reformer unit models based on computational fluid dynamics.

Part IV: Analysis

Chapter 10: PEM fuel cell analysis.

Chapter 11: PEM fuel cell stack analysis.

ISBN 13: 978-1-98347-499-6
Pages: 478 - Published: 2018

Book Series.

Progress in River Engineering & Hydraulic Structures: Volume 1.
Mohammed Baqer N. Al-Baghdadi, Editor

Chapter 1: Optimum Safe Hydraulic Design of Stepped Spillway.

Ishraq M. R. A. Al-Shareefi, Abdul-Hassan K. Al-Shukur, Safaa K. Hashim Al-Khalaf

Chapter 2: Investigation of Local Scour Around Curved Groynes.

Huda Hadi Al-Yassiry, Hayder A. K. Al-Thamiry, Hasan Mahdi M. Al-Khateeb

Chapter 3: Investigating the Setting of the Entrance of Vertical Suction Pipes in Storm Water Pump Station.

Ali Hussein Athab, Hasan Mahdi M. Al-Khateeb, Hayder A. K. Al-Thamiry

Chapter 4: Experimental Investigation to Determine the Discharge Coefficient of Piano Key Weir.

Zainab Ahmed El-Katib, Saleh I. Khassaf, Laith J. Aziz

Chapter 5: Manning Roughness Coefficient of Ferrocement Canals Strengthened Using Carbon Fiber Reinforced Polymer.

Batool Adel Farhan, Hayder Talib Nimnim

ISBN 13: 978-1-98520-206-1
Pages: 556 - Published: 2018

Book Series.

Progress in River Engineering & Hydraulic Structures: Volume 2.
Mohammed Baqer N. Al-Baghdadi, Editor

Chapter 1: Analysis of local scouring processes downstream of a rigid bed of a hydraulic structure.

Donatella Termini

Chapter 2: Groundwater Recharge by Selection of Suitable Sites for Underground Dams using a GIS-based Fuzzy Approach in Semi-Arid Regions.

Hamidreza Koohbanani, Reza Barati, Mohammadreza Yazdani, Saeed Sakhdari, Reza Jomemanzari

Chapter 3: Reduce Spillways Cavitation Damages through Accurate Prediction of Bottom Air Concentration.

Masoud Arami-Fadafan, Mehdi Azhdary Moghaddam, Reza Barati

Chapter 4: Applications of Improved Moving Particle Semi-implicit Method for Numerical Simulation of Flow over Hydraulic Structures.

Masoud Arami-Fadafan, Masoud-Reza Hessami-Kermani, Reza Barati

Chapter 5: Assessment of Water Quality Index with Analysis of Physico-Chemical Parameters (Case study: The Shatt AlArab River-Iraq).

Ammar Salman Dawood, Ahmed Naseh Ahmed Hamdan, Ahmed Sagban Khudier

Chapter 6: Developing a Model to Predict Underwater Pipeline Scouring Depth using Gamma Test and ANFIS.

Naser Niknia, Azam Arabi Yazdi, Reza Barati